TM 9-2520-246-34-1 FRAME 3 1. Take out cotter pin (1). 2. Take out input gear shaft (2). 3. Take input gear (3) out of power takeoff housing (4). 4. Take out two sets of roller bearings (5) from input gear (3). 5. Take out and throw away two thrust washers (6). IF WORKING ON DOUBLE OUTPUT POWER TAKEOFF (MODEL WND-7-28), GO TO FRAME 4. IF WORKING ON SINGLE OUTPUT POWER TAKEOFF (MODEL WN-7-28), GO TO FRAME 8 2-293