TM 9-2520-246-34-1 FRAME 2 1. Put lever assembly (1) with brakeshoe (2) into place on handbrake brake drum (3). 2. Put in anchor pin (4). 3. Check that brakeshoe (2) is flush with handbrake brake drum (3) or not more than 1/16-inch below handbrake brake drum. If brakeshoe is more than 1/16-inch below handbrake brake drum, add spacer (5). 4. Put on jamnut (6). 5. Screw in anchor pin (4). 6. Tighten jamnut (6). GO TO FRAME 3 2-277