TM 9-2520-246-34-1 FRAME 3 1. Take out four capscrews (1) and four lockwashers (2). Take off countershaft rear bearing cover (3) and gasket (4). 2. Subtract 0.005-inch from dial indicator reading in step 4 of frame 2. The difference is the thickness of shims (5) needed. 3. Put on shims (5), gasket (4), and countershaft rear bearing cover (3). Aline all screw holes and put in four capscrews (1) and four lockwashers (2). 4. Evenly tighten four capscrews (1) to 60 to 77 pound-feet. GO BACK TO FRAME 2 2-267