TM 9-2520-246-34-1 FRAME 9 1. Measure fit of 2. Measure fit of 3. Measure fit of GO TO FRAME 10 NOTE Readings must be within limits given in table 2-56. The letter T indicates a tight fit. If readings are not within given limits, throw away part and get a new one. oil seal (1) in bore (2). oil seal (3) in input shaft cover bore (4). deflector (5) on flange (6). Index Number l and 2 3 and 4 5 and 6 Table 2-56. Input Shaft Cover Fits and Tolerances Item/Point of Measurement Fit of oil seal in bore Fit of seal in input shaft cover Fit of deflector on flange Size and Fit of New Parts (inches) 0.0024T to 0.0078T 0.0038T to 0.0098T 0.0020T to 0.0100T Wear Limit (inches) 0.0015T 0.0025T 0.0010T 2-217