TM 9-2520-246-34-1 FRAME 8 1. Measure 2. Measure 3. Measure 4. Measure 5. Measure NOTE Readings must be within limits given in table 2-55. If read- ings are not within given limits, throw away part and get a new one. flange outside diameter (1). deflector inside diameter (2). oil seal outside diameter (3). input shaft cover bore (4). oil seal outside diameter (5). GO TO FRAME 9 Table 2-55. Input Shaft Cover Wear Limits Index Number Item/Point of Measurement 1 Input shaft flange outside diameter 2 Deflector inside diameter 3 Oil seal outside diameter 4 Input shaft cover bore 5 Oil seal outside diameter Size and Fit of New Parts (inches) 2.4016 to 2.4056 2.3956 to 2.3996 3.3524 to 3.3563 3.3465 to 3.3485 1.5000 to 1.5039 Wear Limit (inches) 2.4010 None None 3.3495 None 2-216