TM 9-2520-246-34-1 FRAME 6 NOTE Readings must be within limits given in table 2-53. The letter L indicates a loose fit and the letter T indicates a tight fit. If readings are not within given limits, throw away part and get a new one. 1. Measure shifter shaft bore (1). 2. Measure front output shaft bearing bore (2). 3. Measure fit of shifter shaft (3) in shifter shaft bore (1). 4. Measure front output shaft bearing (4) in front output shaft bearing bore (2). GO TO FRAME 7 Index Number 1 2 l and 3 2 and 4 Table 2-53. Front Output Shaft Cover Wear Limits Item/Point of Measurement Shifter shaft bore Front output shaft bearing bore Fit of shifter shaft in bore Fit of output shaft bearing in bore Size and Fit of New Parts (inches) 0.8760 to 0.8780 3.3465 to 3.3485 0.0020L to 0.0052L 0.007T to 0.00081L Wear Limit (inches) 0.8800 3.3495 0.0100L 0.0015L 2-214