TM 9-2520-246-34-1 FRAME 2 1. 2. 3. 4 . GO Measure Measure Measure Measure bore (8) NOTE Readings must be within limits given in table 2-49. The letter L indicates a loose fit and the letter T indicates a tight fit. If readings are not within given limits, throw away part and get a new one. fit of fit of fit of fit of TO FRAME 3 shifter shaft (1) in bore (2). input shaft front bearing (3) in bearing bore (4). countershaft front bearing outer race (5) in bearing bore (6). front output shaft front bearing outer race (7) in bearing Index Number 1 and 2 3 and 4 5 and 6 7 and 8 2-210 Table 2-49. Transfer Cover Fits and Tolerances Item/Point of Measurement Fit of shifter shaft in bore Fit of input shaft bearing in bore Fit of countershaft bearing race in bore Fit of output shaft bearing in bore Size and Fit of New Parts (inches) 0.0039L to 0.0063L 0.008L to 0.007L 0.003T to 0.001T 0.0010T to 0.0030T Wear Limit (inches) 0.070L 0.001L 0.00T 0.000T