TM 9-2520-246-34-1 FRAME 2 1. Measure fit 2. Measure fit END OF TASK NOTE Readings must be within limits given in table 2-47. The letter T indicates a tight fit. If readings are not within given limits, throw away part and get a new one. of bearing cone (1) on rear output shaft (2). of bearing cone (3) on rear output shaft (4). Table 2-47. Rear Output Shaft Assembly Fits and Tolerances Index Number 1 and 2 3 and 4 Item/Point of Measurement Fit of bearing cone on shaft Fit of bearing cone on shaft Size and Fit of New Parts (inches) 0.0005T to 0.0015T 0.0005T to 0.0025T Wear Limit (inches) 0.000T 0.000T 2-208