TM 9-2520-246-34-1 FRAME 3 1. 2. 3. 4. 5. Measure Measure Measure Measure Measure NOTE Readings must be within limits given in table 2-40. The letter L indicates a loose fit and the letter T indicates a tight away fit of fit of fit of fit of fit of GO TO FRAME 4 fit. If readings are not within given limits, throw part and get a new one. front output shaft (1) in rear output shaft bore (2). key (3) in front output shaft keyway (4). key (3) in inner race keyway (5). front output shaft (6) in inner race bore (7). reverse shift shaft fork (8) in reverse shift collar groove (9). Table 2-40. Front Output Shaft Assembly Fits and Tolerances Index Number l and 2 3 and 4 3 and 5 6 and 7 8 and 9 Item/Point of Measurement Fit of shaft in bore Fit of key in keyway Fit of key in keyway Fit of shaft in bore Fit of fork in groove Size and Fit (inches) 0.0020L to 0.0040L 0.0006L to 0.0024L 0.0020T to 0.0010L 0.0008T to 0.0012L 0.0355L to 0.0435L Wear Limit (inches) 0.0055L 0.0006L 0.0030L 0.0015L 0.0590L 2-200