TM 9-2520-246-34-1 FRAME 9 NOTE Readings must be within limits given in table 2-36. The letter T indicates a tight fit. If readings are not within given limits, throw away part and get a new one. 1. Measure fit of 2. Measure fit of 3. Measure fit of GO TO FRAME 10 oil seal (1) in bore (2). oil seal (3) in input shaft cover bore (4). deflector (5) on flange (6). Table 2-36. Input Shaft Cover Fits and Tolerances Index Number l and 2 3 and 4 Item/Point of Measurement Fit of oil seal in bore Fit of oil seal in input shaft cover bore Fit of deflector on flange Size and Fit of New Parts (inches) 0.001T to 0.007T 0.003T to 0.009T 5 and 6 0.011T to 0.024T Wear Limit (inches) 0.0065T 0.0020T 0.0009T 2-196