TM 9-2520-246-34-1 FRAME 8 1. 2. 3. 4. 5. GO NOTE Readings must be within limits given in table 2-35. If read- ings are not within given limits, throw away part and get a new one. Measure flange outside diameter (1). Measure deflector inside diameter (2). Measure oil seal outside diameter (3). Measure input shaft cover bore (4). Measure oil seal outside diameter (5). TO FRAME 9 Index Number 1 2 3 4 5 Table 2-35. Input Shaft Cover Wear Limits — Item/Point of Measurement Input shaft flange outside diameter Deflector inside diameter Oil seal outside diameter Input shaft cover bore Oil seal outside diameter Size and Fit of New Parts (inches) 2.522 and 2.530 2.506 and 2.511 3.353 and 3.357 3.348 and 3.350 1.501 and 1.505 Wear Limit (inches) 2.5150 None None 3.3495 None 2-195