TM 9-2520-246-34-1 FRAME 4 NOTE Readings must be within limits given in table 2-31. The letter L indicates a loose fit and the letter T indicates a tight fit. If readings are not within given limits, throw away part and get a new one. 1. Measure fit of 2. Measure fit of 3. Measure fit of 4. Measure fit of GO TO FRAME 5 expansion plug (1) in housing bore (2). input shaft rear bearing (3) in bearing bore (4). countershaft rear bearing outer race (5) in bearing bore (6). rear output shaft rear bearing outer race (7) in bearing bore (8). Index Number l and 2 3 and 4 5 and 6 7 and 8 Table 2-31. Transfer Case Fits and Tolerances Item/Point of Measurement Fit of expansion plug in bore Fit of input shaft bearing in bore Fit of counter shaft bearing race in bore Fit of output shaft bearing race in bore Size and Fit of New Parts (inches) 0.007T to 0.013T 0.0014L to 0.0002T 0.001L to 0.0010T 0.0010T to 0.0010L Wear Limit (inches) 0.0046T 0.0018L 0.0012L 0.0015L 2-191