TM 9-2520-246-34-1 i. Case Cover. FRAME 1 NOTE Case (1) and cover (2) are a matched set. Mark both parts so that case and cover will not be mixed up with other trans- mission transfer assemblies being worked on at the same Soldier A Soldiers A and B time. Do not supply 1. Take 2. Take lose or damage three taper pins (3). They are non- items that will have to be made. out six capscrews (4) with six lockwashers (5). out 12 capscrews (6), 12 lockwashers (7), and 12 nuts (8). 3. Put back two capscrews (4) into two puller screw holes in cover (2). 4. Tighten two capscrews (4) until cover (2) lifts off case (1). 5. Pry up and lift off cover (2). Take out two capscrews (4) and throw away gasket (9). END OF TASK 2-124