TM 9-2520-246-34-1 c. Reverse Position. NOTE FRAME 1 If transmission will not shift into gear easily, turn input or output shafts while shifting. 1. Move gear shift lever (1) to R (reverse) position as shown. 2. Turn input shaft (2). Output shaft flange (3) should turn in the opposite direction of input shaft. 3. If output shaft flange (3) does not turn, do the following: a. Remove shifter shaft cover. Refer to para 2-4a. b. Disassemble shifter shaft cover. Refer to para 2-5f. c. Assemble shifter shaft cover. Refer to para 2-10f. d. Replace shifter shaft cover. Refer to para 2-llj. GO TO FRAME 2 2-111