TM 9-2520-246-34-1 FRAME 2 1. Put on gasket (1) and aline all screw holes. 2. Put shifter shaft (2) in neutral position. Refer to TM 9-2320-209-10. 3. Put on shifter shaft cover (3), making sure three forks (4) go into synchronizer grooves (5) and groove in first and reverse gear (6). 4. Put in eight capscrews (7) with eight lockwashers (8). Evenly tighten cap screws to 25 to 32 pound-feet. END OF TASK 2-104