30. Install clamp (1) with harnesses (16) and (17) on stud (5) with new locknut (15). NOTE Perform step 31 for vehicles with serial numbers up to 504923 only. 31. Install quick-start bracket (4), new lockwasher (7), and ground strap (12) on engine (18) with four new lockwashers (3) and screws (2). 32. Connect magnetic speed sensor lead (13) on flywheel housing (6) to plug with leads 429 and 428 (14). 33. Install vent tube (9) to elbow (11) on transmission (8) and tighten nut (10). 34. Apply sealing compound to threads of eight screws (21) and install propeller shaft (20) on flanges (19) and (22) at transmission (8) and transfer case (23) with eight screws (21). Tighten screws (21) 40-44 lb-ft (54-60 N•m). TM 9-2320-386-24-1-2 0295 00 POWER PLANT REPLACEMENT (Contd) 0295 00-26 ~ 14 17 18 1 5 9 13 10 11 12 16 15 2 3 4 ~ ~ 7 8 6