2. Install first clutch spring compressor and tighten nut until snapring (1) is clear of spring retainer (3). 3. Remove snapring (1) from transmission (2). 4. Remove first clutch spring compressor from transmission (2). 5. Remove snapring retainer (3), twenty-two springs (5), and first clutch piston (4) from trans- mission (2). 6. Remove outer seal (7) and inner seal (6) from piston (4). Discard seals (6) and (7). 1 2 3 4 FIRST CLUTCH SPRING COMPRESSOR 0381 00-4 TM 9-2320-386-24-1-2 0381 00 FIRST CLUTCH MAINTENANCE (Contd)