73. Remove eight screws (3) and propeller shaft (2) from flanges (1) and (4) on transmission (6) and transfer case (5). 74. Loosen nut (18) and remove vent tube (17) from elbow (19) on transmission (6). 75. Disconnect plug with leads 429 and 428 (21) from magnetic speed sensor lead (20) on flywheel housing (14). NOTE Perform step 76 for vehicles with serial numbers up to 504923 only. 76. Remove four screws (9), lockwashers (10), ground strap (16), lockwasher (15), and quick-start bracket (11) from engine (13). Discard lockwashers (10) and (15). 77. Remove locknut (22), clamp (8), and engine wiring harness (7) from stud (12) on engine (13). Discard locknut (22). 1 2 3 4 5 ~ 6 TM 9-2320-386-24-1-2 0295 00 POWER PLANT REPLACEMENT (Contd) 0295 00-16