1 2 3 4 5 6 7 8 9 10 11 11 13 14 15 16 17 18 5 12 0361 00-5/6 blank TM 9-2320-386-24-1-2 0361 00 PISTONS AND CONNECTING RODS MAINTENANCE (Contd) END OF WORK PACKAGE 10 3. Push piston (11) into cylinder block (12) until connecting rod (5) seats on crankshaft (15). 4. Install lower sleeve bearing (16) on cap (17). 5. Apply lubricant to male threads of screws (13) and install cap (17) on connecting rod (5) and two screws (13) with nuts (18). Tighten nuts (18) 35-45 lb-ft (48-61 N•m). 6. Put an alignment mark on cap (17) and nuts (18). Tighten nuts (18) an additional 1/6 turn. 7. Install cylinder head (WP 0302 00). 8. Install piston cooling tube (WP 0362 00).