62. Disconnect plug with leads 380 and 380A (11) from backup light switch (13). 63. Disconnect plug with lead 324 (3) from transmission oil temperature switch (2). 64. Loosen nuts (6) and (14) and remove oil inlet hose (7) and oil outlet hose (9) from fitting (5) and elbow (1). 65. Remove screw (12), washer (10), oil outlet hose (9), and clamp (8) from flywheel housing (4). 66. Remove eight locknuts (18), screws (17), and propeller shaft (16) from flange (15) on transfer case and front axle differential. Discard locknuts (18). 67. Remove screw (19), lockwasher (20), ground strap (21), and lockwasher (22) from flywheel housing (23). Discard lockwashers (20) and (22). 68. Loosen nut (25) and remove air line (26) from elbow (24) on air compressor (27). 69. Remove screw (30), washer (29), and clamp (28) with air line (26) from oil pan (31). 70. Remove locknut (34), screw (32), and clamp (33) with air line (26) from bracket (35). Discard locknut (34). 71. Remove locknut (39), screw (36), and clamp (38) with air line (26) from air tank support bracket (37). Discard locknut (39). 72. Loosen nut (40) and remove air line (26) from union (41) and vehicle. ~ ~ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 TM 9-2320-386-24-1-2 0295 00 POWER PLANT REPLACEMENT (Contd) 0295 00-14