0353 00-8 TM 9-2320-386-24-1-2 0353 00 CARGO BODY REPLACEMENT (Contd) NOTE M35A3 front left side bracket mounting screws secure two sets of springs positioned on top of body brackets. Right side spring sets are the same and are secured below frame brackets. 5. Install four screws (17), springs (18), and springs (15) on two brackets (2) and (16) with four washers (14) and new locknuts (13). 6. Adjust spring screws (17) to set height of springs (18) and (15) to 6.375 in. (16.19 cm). 7. Install six screws (5) on brackets (3) and (6) with six washers (8) and new locknuts (7). Tighten locknuts (7) 125-165 lb-ft (170-224 N.m). NOTE M36A3 long wheelbase models have two additional body and frame brackets. Perform step 8 for hardware installation. 8. Install four screws (9) on two brackets (4) and (10) with four washers (12) and new locknuts (11). Tighten locknuts (11) 105-145 lb-ft (142-197 N.m). 9. Remove lifting device, chains, and guide lines from cargo body (1).