TM 9-2320-386-24-1-2 0344 00 FORWARD-REAR AND REAR-REAR AXLE REPLACEMENT (Contd) 0344 00-6 12. Remove three locknuts (1), screws (3), and clamps (5) with hoses (6) and (11) from clips (2). Discard locknuts (1). 13. Remove two screws (7), lockwashers (8), and loop clamps (9) with hoses (6) and (11) from axle housing cover (4). Discard lockwashers (8). NOTE Hose removal from adapter on air manifold is the same for left and right side. The right side is shown. 14. Disconnect hose (11) from adapter (14). 15. Remove compression sleeve (12) and nut (13) from hose (11). Discard compression sleeve (12). INSTALLATION 1. Install new compression sleeve (12) and nut (13) on hose (11). NOTE Hose installation to adapter is the same for left and right side. The right side is shown. 2. Connect hose (11) to adapter (14) and tighten nut (13). 3. Install two hoses (11) and (6) on three clips (2) with screws (3), clamps (5), and new locknuts (1). 4. Install two loop clamps (9), pipe tee (10), and hoses (6) and (11) on axle housing cover (4) with two new lockwashers (8) and screws (7).