TM 9-2320-386-24-1-2 0343 00 FRONT AXLE REPLACEMENT (Contd) 0343 00-10 6 7 8 9 10 12 9. Install flange (3) with propeller shaft (1) on front axle differential flange (4) with four screws (2) and new locknuts (5). Tighten locknuts (5) 102-121 lb-ft (138-164 N•m). 10. Install two clamps (11), brake line (10), new lockwasher (9), screw (8), washer (6), and nut (7) on axle housing cover (12). 11. Install two brackets (23) on axle housing (24) with two new assembled-washer bolts (22). 12. Install two spring plates (19), new lockwashers (18), and nuts (17) on studs (27). Tighten nuts (17) 80-105 lb-ft (108-142 N•m). 13. Connect two springs (20) to spring plates (19). 14. Install two new washers (26), brake line assemblies (21), new washers (26), and brake line screws (25) on backing plates (16). Tighten brake line screws (25) 65 lb-ft (88 N•m). 15. Install air connectors (13) on fitting (14) at axle hub (15). 16. Connect two CTIS connectors (28) on CTIS air line (29) to connectors (13) on axle hubs (15). 1 2 3 4 5 ~ 24 23 22 21 20 19 18 17 ~ 16 26 26 25 27 15 13 28 29 12 30 31 32 30 32 31 33 ~ 15 13 14 11 11