24. Remove nut (12), lockwasher (13), STE/ICE-R lead 770-M (11), and ground cable 93 (14) from starter ground stud (15). Discard lockwasher (13). 25. Remove nut (16), lockwasher (17), STE/ICE-R lead 770-S (10), and lead 214 (18) from starter solenoid (1). Discard lockwasher (17). 26. Remove nut (6), lockwasher (5), positive cable lead 6 (4), harness lead 2 (3), and relay lead 14 (2) from starter solenoid (1). Discard lockwasher (5). 27. Remove nut (7), lockwasher (8), and STE/ICE-R lead 770-T (9) from starter motor (19). Discard lockwasher (8). 28. Remove clamp (29) and heater hose (24) from fitting (30). 29. Remove screw (32), clamp (33), and hose (24) from fender (34). 30. Remove two screws (21), washers (22), clamps (23), and hose (24) from engine (20). 31. Remove clamp (36) and hose (37) from tube (26). 32. Loosen nut (31) and remove tube (26) from adapter (27) on thermostat housing (28). 33. Remove screw (35), washer (22), clamp (25), and tube (26) from engine (20). 1 2 4 5 7 15 16 17 18 3 ~ 6 8 9 10 11 12 13 14 19 ~ TM 9-2320-386-24-1-2 0295 00 POWER PLANT REPLACEMENT (Contd) 0295 00-6