TM 9-2320-386-24-1-2 0340 00 TRANSFER CASE MAINTENANCE (Contd) 0340 00-7 27. Remove two locknuts (40), screws (32), washers (31), and left transfer case support (41) from transfer case (16). Discard locknuts (40). 28. Remove locknut (28), washer (29), bushing (3), screw (4), bushing (3), and right transfer case support (6) from support bracket (2). Discard locknut (28). 29. Remove two nuts (51), washers (52) and (50), chain, and screws (48) from transfer case (16). 30. Install two screws (49), washers (52), and nuts (51) on transfer case (16). NOTE Perform step 31 if stud(s) are damaged. 31. Remove threaded stud(s) (22) or threaded stud(s) (27) from transfer case. INSPECTION AND REPAIR 1. For repair, mount transfer case (16) on maintenance stand. 2. Inspect, and if necessary, repair transfer case (TM 9-2520-246-34-1). 41 30 32 31 34 35 36 33 37 38 39 40 47 42 43 23 45 46 44 9 11 12 13 7 6 5 4 3 2 1 29 28 25 27 26 10 8 33 OPTIONAL CONFIGURATION 16 ~ 16 50 49 48 52 CHAIN 51 14 15 16 19 18 17 11 20 21 TRANSMISSION AND DIFFERENTIAL LIFT SAFETY STRAP 16 22 24 23