TM 9-2320-386-24-1-2 0295 00 POWER PLANT REPLACEMENT (Contd) REMOVAL CAUTION Cap or plug all hoses, connections, and openings immediately after disconnection or component removal to prevent contamination. Failure to do so may result in damage to equipment. NOTE Tag all hoses, leads, and tubes for installation. Ensure they are tied away from engine and transmission after removal or disconnection. 1. Remove hose (9) from elbow (8) on radiator (6). 2. Remove hose clamps (1) and (17) and elbows (2) and (3) from intake manifold (20). 3. Loosen clamps (11) and (14) and remove air inlet hoses (10) and (15) with elbow (12) from turbocharger (13) and air cleaner elbow (16). 4. Loosen two clamps (30) and remove exhaust flex elbow (29) with gaskets (26) and (27) from turbocharger (13) and inlet on exhaust pipe (28). Discard gaskets (26) and (27). 5. Remove two clamps (19) and hose (18) from air compressor (22) and adapter tube (4). 6. Remove clamp (5) and air intake tube assembly (21) from charged air cooler (7). 7. Remove clamps (24) and (25) and tube assembly (23) from turbocharger (13) and charged air cooler (7). 0295 00-2