1 ~ 2 3 2 3 4 5 6 2 7 2 7 8 9 9 10 12 13 14 15 ~ 16 15 11 10 13. Remove two locknuts (3), screws (7), and four clamps (2) from frame rail (1) at rearward side of air dryer (6). Discard locknuts (3). 14. Disconnect harness plug with lead 27 and ground (GND) (4) from air dryer (6) connector (5). 15. Remove locknut (14), screw (12), two ground (GND) leads (11), and lockwasher (13) from crossmember (16). Discard locknut (14) and lockwasher (13). 16. Remove two locknuts (9), screws (15), and three clamps (10) from crossmember (16). Discard locknuts (9). 17. Remove tiedown straps (8), as necessary. Discard tiedown straps (8). TM 9-2320-386-24-1-2 0332 00 REAR WIRING HARNESS REPLACEMENT (Contd) 0332 00-4