60. Install ground (GND) lead (13) on fan motor terminal (14) with new lockwasher (12) and nut (11). 61. Install two ground (GND) leads (9) on bracket (3) with two new lockwashers (6), screw (10), and nut (4). 62. Connect plug lead 400A (7) from wiring harness (5) to fan motor lead (8). 63. Connect plug lead 85A (16) to low air warning buzzer (17). 64. Install glove box (2) on instrument panel (15) with ten screws (1). 1 2 ~ ~ ~ 3 4 5 6 6 7 8 9 10 14 13 12 11 16 15 17 TM 9-2320-386-24-1-2 0330 00 FRONT WIRING HARNESS REPLACEMENT (Contd) 0330 00-28