INSTALLATION NOTE If new wiring harness is to be installed, transfer tags installed at removal on old harness to new harness. If wiring harness requires repair, refer to WP 0125 00 for further instructions. 1. Position front wiring harness in vehicle. NOTE As front wiring harness is installed, install clamps on tagged locations, then perform installation as specified for each location. Wiring harness is engineered for each vehicle configuration. Adjust wiring harness to remove slack or allow slack as required for proper installation. 2. Route wiring harness (1) into vehicle cab (2) through firewall (3). TM 9-2320-386-24-1-2 0330 00 FRONT WIRING HARNESS REPLACEMENT (Contd) 0330 00-18