NOTE Remove tags after installation. 3. Install six spacer sleeves (6) on cylinder block (7). 4. Apply sealing compound to both sides of three new gaskets (8), and install gaskets (8) and three side covers (1) on cylinder block (7) with two washers (9), studs (10), eleven washers (11), and short screws (12). Do not tighten short screws (12). 5. Install ten washers (14) and long screws (13) on three side covers (1). Tighten long screws (13), short screws (12), and two studs (10) 13-23 lb-ft (18-31 N•m). 13 14 8 7 10 9 9 10 12 6 8 1 1 1 6 8 11 0308 00-5 TM 9-2320-386-24-1-2 0308 00 CAMSHAFT ROLLER FOLLOWERS AND COVERS MAINTENANCE (Contd)