REMOVAL 1. Remove screw (6), washer (5), clamp (4), and spacer sleeve (7) from side cover (8). 2. Remove clamp (2) and breather tube (3) from engine crankcase breather (1). NOTE Note position and length of screws and studs for installation. 3. Remove two studs (13), washers (12), ten long screws (16), and washers (17) from three side covers (8). 4. Remove eleven short screws (15) and washers (14) from side cover (8). 5. Remove three side covers (8), gaskets (11), and six spacer sleeves (9) from cylinder block (10). Discard gaskets (11). 0308 00-2 TM 9-2320-386-24-1-2 0308 00 CAMSHAFT ROLLER FOLLOWERS AND COVERS MAINTENANCE (Contd)