ADAPTER 2 1 3 4 1 4 2 3 LOCATOR LOCATOR SCREW NUT ASSEMBLY SEAL INSTALLER SEAL SLEEVE SLIDE PULLER 0305 00-3/4 blank TM 9-2320-386-24-1-2 0305 00 CRANKSHAFT REAR SEAL MAINTENANCE (Contd) END OF WORK PACKAGE NOTE Rear seal is properly installed when faces of seal sleeve and locator are flush. 7. Turn seal sleeve over and install seal sleeve, seal installer, and nut assembly on locator. Tighten nut assembly to complete installation of rear seal (2). 8. Remove nut assembly, seal installer, seal sleeve, two locator screws, and locator from crankshaft (4). 9. Install flexplate and hub (WP 0337 00). 10. Install transmission (in-vehicle) (WP 0335 00).