89. Install rear surge tank bracket (18) with surge tank (19) on intake manifold (37) with two washers (17) and screws (39). 90. Install surge tank (19) on front surge tank bracket (34) with two washers (33), screws (32), and new locknuts (38). 91. Install hose (31) on fitting (28) of water pump (29) and tighten clamp (30). 92. Install hose (21) on fitting (23) of water regulator housing (24) and tighten clamp (22). 93. Install hose (20) on elbow (25) of radiator (27) and tighten clamp (26). 94. Install new tiedown strap (35) on hoses (31) and (36). 95. Install upper radiator shroud (WP 0074 00). 96. Install radiator hoses (WP 0070 00). 97. Install brushguard (WP 0230 00). 98. Connect battery ground cable (WP 0121 00). 99. Fill cooling system to proper level (WP 0068 00). 100. Start engine and check for proper operation (TM 9-2320-386-10). 39 17 18 19 31 27 20 21 22 23 24 25 26 28 29 30 32 33 34 35 37 38 ~ 36 ~ TM 9-2320-386-24-1-2 0302 00 CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd) 0302 00-35/36 blank END OF WORK PACKAGE