23 24 25 27 28 29 30 12 12 15 16 17 20 21 22 13 14 LIFTING DEVICE CHAIN 26 19 18 ~ 72. Remove two nuts (12), screws (14), and washers (13) from radiator (18). 73. Install ends of chain on radiator (18) with two washers (13), screws (14), and nuts (12). 74. Install lifting device at center point of chain, and take up slack. .WARNING. All personnel must stand clear during lifting operations. A snapped chain, or shifting or swinging load may cause injury to personnel. CAUTION When installing radiator, avoid contact with the fan actuator hub. Contact between the radiator and fan actuator hub can cause damage to the radiator. 75. Lift radiator (18) with lifting device and position in vehicle. 76. Connect oil line (21) to oil line fitting (22) on radiator (18). 77. Install pivot mount (17) on crossmember (19) with four washers (16), screws (15), and new locknuts (20). 78. Install bracket (26) on bracket (23) with new bushing (24), washer (25), screw (27), new bushing (28), washer (29), and new locknut (30). 79. Remove lifting device from chain. Remove two nuts (12), screws (14), and washers (13) from radiator (18) and lifting chain. Install two washers (13), screws (14), and nuts (12) on radiator (18). TM 9-2320-386-24-1-2 0302 00 CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd) 0302 00-31