61. Position front lifting bracket (32) and fan bracket (39), with fan (36) attached, on engine (2) and alternately tighten two screws (35). 62. Install three washers (33) and screws (34) on fan bracket (39) and engine (2). 63. Install washer (38) and screw (37) on fan bracket (39) and mounting bracket (5). 64. Install bracket (44), air compressor coolant line (45), and clamp (46) on engine (2) with washer (43) and screw (42). 65. Install throttle return spring (52) on brackets (44) and (53). 66. Connect air compressor coolant line (45) to elbow (40) on water regulator housing (41). 67. Connect air compressor coolant line (48) on fitting (51). 68. Install air compressor coolant line (48) and clamp (47) on fan bracket (39) with washer (50) and screw (49). 2 44 42 41 40 51 50 49 48 47 39 46 45 52 44 53 43 33 34 36 37 38 39 5 2 32 35 TM 9-2320-386-24-1-2 0302 00 CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd) 0302 00-29