80. Install front lifting bracket (2) on cylinder head (1) with lifting screws. 81. Remove fourteen screws (3), washers (8), and six screws (4) from cylinder head (1) and cylinder block (6). 82. Install chain on lifting brackets (2) and (7) and attach chain to lifting device. CAUTION Ensure cylinder head is raised straight up. Cylinder head may stick to gasket or guide dowels on removal, causing damage. 83. Remove cylinder head (1) and gasket (5) from cylinder block (6). Discard gasket (5). 84. Remove lifting device and chain from lifting brackets (2) and (7). 1 2 LIFTING SCREWS LIFTING DEVICE CHAIN 3 8 7 4 2 1 5 6 TM 9-2320-386-24-1-2 0302 00 CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd) 0302 00-18