TM 9-2320-386-10 2-18 Change 1 CLEANING MATERIALS USED TO REMOVE Surface Oil/Grease Salt/Mud/ Surface Rust/ Dust/Debris Corrosion Body Skysol 100**, running High pressure water, Wire brush and water, and damp soapy warm water, Naval Jelly, dry rags, or dry rags. soft brush, and damp and lubricating oil. * or dry rags. Cab Interior Skysol 100**, Damp and dry rags. Wire brush and (Metals) and damp or dry rags. Naval Jelly, dry rags, and lubricating oil.* Cab Interior/ Saddle soap, warm Soft brush, soapy Not applicable. Cab Top water, soft brush, and warm water, and (Material) dry rags. damp or dry rags. Engine/ Skysol 100**, running High pressure Bristle brush, warm Transmission water, and rags. water, soapy warm soapy water, and dry - water, soft wire rags. brush, and damp or dry rags. Frame Skysol 100**, High pressure Wire brush and running water, water, soapy warm Naval Jelly, dry rags, and rags. water, wire brush, and lubricating oil. * and damp or dry rags. Glass Glass cleaning solution Glass cleaning solu- Not applicable. and clean, dry rags. tion and clean, dry rags. Radiator Not applicable. Low pressure water, Not applicable. air, soapy warm water, and damp or dry rags. Rubber Damp or dry rags. Damp or dry rags. Not applicable. Insulation Tires Soapy water and High pressure water Not applicable. bristle brush. and bristle brush. Wire Rope Cleaning compound Wire brush. Wire brush and and wire brush. lubricating oil. * Wood Detergent, warm Low pressure water, Not applicable. water, and damp or soapy warm water, dry rags. and damp or dry rags. * After cleaning, apply light grade of lubricating oil to all unprotected surfaces to prevent continued rust. ** WARNING: Skysol 100 is flammable and will not be used near open flame. A fire extinguisher will be kept nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel. Table 2-1. General Cleaning Instructions.