TM 9-2320-386-10 Change 1 1-9 STANDARD METRIC 1. CAPACITIES Cooling System: Dry ....................................... 29 qt 27.4 L Drain and Refill............................. 27 qt 26 L Engine Crankcase: Dry ...................................... 21 qt 19.9 L W/Filter .................................. 19 qt 18 L WO/Filter ................................. 18 qt 17 L Fuel Tank ................................. 50 gal. 189.3 L Transmission: Dry ...................................... 21 qt 19.9 L Drain and Refill............................. 10 qt 9.5 L After Rebuild............................... 16 qt 15.1 L Front Winch: Winch Gearcase ........................... 2.75 pt 1.3 L Winch End Frame Housing ................... 1.25 pt 0.6 L Winch Hydraulic Reservoir: Dry .................................... 42 qt 39.7 L Drain and Refill ........................... 39 qt 36.9 L Master Cylinder Reservoir ........................ 2 qt 1.9 L Front and Rear Axle Differentials: Drain and Refill .............................. 6 qt 5.7 L Transfer Case: Drain and Refill .............................. 7 qt 6.6 L Steering Gear: Drain and Refill ............................ 3.13 pt 1.48 L 2. ENGINE Manufacturer ........................... Caterpillar Model ............................... 3116 ATAAC Type ..... Diesel, four-cycle, in-line 6 cylinder, turbocharged Weight .................................. 1,198 lb 544 kg Displacement ............................ 403 cu. in. 6.6 L Operating Speed (Full Load) ................ 2,700 RPM Brake Horsepower .......................... 170 HP Maximum Torque (@ 1,550 RPM) ............... 420 lb-ft 570 N•m Oil Pressure ............................. 35-70 psi 241-483 km/L Compression Ratio ............................ 18:1 Fuel Consumption (Approx.) ................... 7-8 mpg 3-3.4 km/L Firing Order .......................... 1, 5, 3, 6, 2, 4 3. FUEL SYSTEM Fuel Pump Location ................. On front of engine Fuel Filter/Water Separator: Manufacturer ............................ DAVCO 1-14. EQUIPMENT DATA