TM-9-2320-386-10 Page 183

TM-9-2320-386-10 Operator's Manual for M44A3 Series Trucks

Page 183 of 223

TM 9-2320-386-10 3-33 3-11. PRIMING THE FUEL SYSTEM CAUTION Do not engage starter switch for more than 15 seconds at a time or with headlights on. If engine does not start in 15 seconds, wait 30 seconds before engaging starter switch again. Failure to do this may result in damage to starter. NOTE The fuel system must be primed if fuel system has been drained for maintenance, or if vehicle has been run out of fuel. a. Set throttle half-open by pressing accelerator pedal (1) or engaging throttle control (4). b. Place accessory/battery switch (3) in ON position. c. Engage starter switch (2) for 15 seconds. d. Allow at least 30 seconds before engaging starter switch (2) again. Repeat steps b and c until engine starts. 1 3 4 2