TM 9-2320-361-34 3-11. OIL PAN REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS All REFERENCES (TM) LO 9-2320-209-12-1 TOOLS TM 9-2320-361-10 TM 9-2320-361-34P General mechanic’s tool kit (Appendix B, Item 1) EQUIPMENT CONDITION Hydraulic jack . Wheels chocked (TM 9-2320-361-10). Jack stands MATERIALSIPARTS ● Parking brake set (TM 9-2320-361-10). ● Engine oil drained (LO 9-2320-209-12-1). Thirty lockwashers (Appendix F, Item 123) Gasket (Appendix F, Item 47) Sealing compound, gasket forming (Appendix C, Item 19) 1. Place hydraulic jack under driver’s side front axle (4) and rake vehicle. 2. Place jack stand under driver’s side frame (1) and lower hydraulic jack. 3. Remove thirty screws (6), lockwashers (7), oil pan (8), and gasket (5) from engine block (3) and timing cover (2). Discard lockwashers (7) and gasket (5). 4. Remove gasket remains from oil pan (8), engine block (3), and timing cover (2). 1. Apply light coat of sealing compound to new gasket (5). 2. Install new gasket (5) and oil pan (8) on engine block (3) and timing cover (2) with thirty new lockwashers (7) and screws (6). 3. Place hydraulic jack under driver’s (left) side front axle (4) and raise vehicle. 4. Remove jack stand from under frame (1). 5. Remove hydraulic jack. 3-34