TM 9-2320-361-34 3-9. TAPPET CHAMBER COVER AND GASKET REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS All TOOLS General mechanic’s tool kit (Appendix B, Item 1) REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-34P EQUIPMENT CONDITION “ Parking brake set (TM 9-2320-361-10). MATERIALS/PARTS ● Engine-oil cooler removed (para. 3-13). Gasket (Appendix F, Item 46) Sealing compound, thread locking (Appendix C, Item 18) Sealing compound, gasket forming (Appendix C, Item 19) 1. Remove eleven screws (6), washers (5), cover (l), and gasket (2) from three studs (3) and engine block (4). Discard gasket (2). 2. Remove all remaining gasket (2) material from cover (1) and engine block (4). 1. Apply a light, even coat of sealing compound on both sides of new gasket (2). 2. Apply a light coat of thread locking sealing compound on the threads of eleven screws (6). 3, Install new gasket (2) and cover (1) on three studs (3) and engine block (4) with eleven washers (5) and screws (6). 3-30