TM 9-2320-361-34 APPENDIX D (Contd) Notes: 1. Fabricate from NSN 9510-00-224-1691, MS500106-015, carbon steel cylinder, 5.000 in. (127.000 mm) in. length and 0.90 in. (22.86 mm) in diameter. 2. The tolerance on all three place decimal dimensions is +0.005 in. (0.127 mm) and the tolerance on all two place decimal dimensions is +0.03 in. (0.76 mm). 3. Trim steel to specifications per above diagram. 4. Drill one hole to specifications per above diagram. 5. Tool is used for installation of dust caps on fuel injector tubes. -. . . - . Figure D-2. Fuel Line Dust Cap Assembly Tool. D-2