TM 9-23209361-34 APPENDIX D ILLUSTRATED LIST OF MANUFACTURED ITEMS This appendix includes complete instructions for making items authorized to be manufactured or fabricated at direct and general support maintenance levels. D-1. Fuel Injection Pump Gear Hub Wrench D-1 D-2. Fuel Line Dust Cap Assembly Tool D-2 D-3. Flywheel Guide Screw D-3 Notes: 1. Fabricate from NSN 9510-00-596-2063, QQS634, carbon steel bar, 8 in. (203.20 mm) x 2 in. (50.8 mm) x 0.38 in. (9.65 mm). 2. The tolerance on all three place decimal dimensions is ±0.005 in. (0.127 mm) and the tolerance on all two place decimal dimensions is ±0.03 in. (0.76 mm). 3. Trim steel to specifications per above diagram. 4. Drill two holes to specifications per above diagram. 5. Tool is used for removal of hub on fuel injection pump. Figure D-1. Fuel Injection Pump Gear Hub Wrench. D-1