TM 9-2320-361-34 17-18. PERSONNEL HEATER HEAT EXCHANGER REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-34P TEST EQUIPMENT EQUIPMENT CONDITION Multimeter (Appendix B, Item 3) ● Personnel heater blower motor removed (para. 17-11). TOOLS ● Personnel heater burner removed (para. 17-16). General mechanic’s tool kit ● Personnel heater flame detetor switch removed (Appendix B, Item 1) (para. 17-15). Tool kit, electrical (Appendix B, Item 2) a. Removal 1. Remove three screws (4). 2. Separate heater housing (5). 3. Remove heat exchanger (3) from heater housing (5). 1. Separate heater housing (5) and install heat exchanger (3) in heater housing (5) with three screws (4). 2. Ensure exhaust tube (2) and flame detector adapter (1) extend through holes of heater housing (5). b. Installation FOLLOW-ON TASKS: ● Install personnel heater flame detector switch (para. 17-15). ● Install personnel heater burner (para. 17-16). ● Install personnel heater blower motor (para. 17-11). 17-47