TM 9-2320-361-34 16-16. POWER DIVIDER REPAlR(M764) (Contd) b. Cleaning and Inspection 1. For general cleaning instructions, refer to para. 2-8. 2. For general inspection instructions, refer to para. 2-9. 3. 4. 5. 6. Inspect two caps (1) and cap (2) for cracks, breaks, and wear. Refer to table 16-5, Power Divider Wear Limits, for measurements. Replace caps (1) or (2) if damaged or worn past limits. Inspect two washers (3) for cracks, bends, and thickness. Refer to table 16-5, Power Divider Wear Limits, for measurements. Replace washers (3) if damaged or worn past limits. Inspect two bushings (6) for cracks, breaks, and wear. Refer to table 16-5, Power Divider Wear Limits, for measurements. Replace bushings (6) if damaged or worn past limits. Inspect five spacers (4), (5), (7), (8), and (9) for cracks, brakes, and wear. Refer to table 16-5, Power Divider Wear Limits, for measurements. Replace spacers (4), (5), (7), (8), or (9) if damaged or worn 7. past limits. Inspect bearing (10) (TM 9-214). Replace bearing (10) if worn or damaged. Table 16-5. Power Divider Wear Limits. ITEM WEAR LIMITS/TOLERANCES NO. lTEM/POINT OF MEASUREMENT INCHES CENTIMETERS 1 Cap: Inner diameter 2.999-3.001 7.617-7.623 Outer diameter 3.342-3.345 8.489-8.496 2 Cap: Inner diameter 2.75 6.985 Outer diameter 3.328 8.453 3 Washer: Thickness 0.120-0.125 0.305-0.318 Inner diameter 0.982-0.984 2.494-2.499 4 Spacer: Inner diameter 0.751-0.753 1.908-1.913 Outer diameter 0.984-0.986 2.499-2.504 5 Spacer: Inner diameter 1.50 3.81 Outer diameter 2.031 5.159 6 Bushing: Inner diameter 1.796 4.562 Outer diameter 2.187 5.555 7 Spacer: Inner diameter 1.000-1.015 2.54-2.578 Outer diameter 1.25 3.175 8 Spacer: Inner diameter 1.796 4.562 Outer diameter 2.187 5.555 9 Spacer: Inner diameter 1.775-1.785 4.509-4.534 Outer diameter 2.75 6.985 16-84