TM 9-2320-361-34 16-13. HYDRAULIC SAFETY LATCH REPLACEMENT (M342A2) (Contd) 4 Install bracket (5) on subframe (9) with four screws (6), washers (10), new locknuts (11), screw (7), and new locknut (8). 5. Secure chain to dump body (1) and lifting device. WARNING All personnel must stand clear during lifting operations. A swinging or shifting load may cause injury to personnel. NOTE Assistant will help with lifting operations. 6. Connect two hydraulic lines (4) to hydraulic cylinders (3). 7. Raise dump body (1) and lower two safety braces (2). 8. Lower dump body (1) and remove chain from dump body (1). FOLLOW-ONTASKS: . Lubricate latch grease fittings (LO 9-2320-209-12-1). . Fill hydraulic reservoir to proper level (LO 9-2320-209-12-1). ● Start engine (TM 9-2320-361-10), check for leaks. 16-73