TM 9-2320-361-34 16-5. REAR WINCH REPLACEMENT (M764) (Contd) b. Installation WARNING All personnel must stand clear of winch during lifting operations. A swinging or shifting load may cause injury to personnel. NOTE Assistant will help with steps 1 and 2. 1. 2. 3. 4. 5. 6. 7. Install chain on rear winch (1) and lifting device. Lift rear winch (1) onto two subframes (8). Install two power divider brackets (10) on two rear winch frames (6) with sixteen washers (9), screws (7), new lockwashers (11), and nuts (12). Install four screws (17) and new locknuts (18) on two rear winch frames (6) and subframes (8). Install cap (3) on body (5) with six screws (4) and new locknuts (2). Install control clevis (15) on rear winch lever (13) with clevis pin (16) and new cotter pin (14). Remove chain from rear winch (1) and lifting device. FOLLOW-ON TASKS: ● Install cab protector and mounting tubes (TM 9-2320-361-20). ● Install power divider (para. 16-15). ● Install rear winch cable (M764) (TM 9-2320-361-20). ● Install rear winch oil drain tubes (M764) (TM 9-2320-361-20). 16-55