TM 9-2320-361-34 16-4. REAR WINCH REPAIR (M764) (Contd) 17. Install two grease fittings (3) in fork bracket (2). 18. Install new woodruff key (5) on fork shaft (4). Position fork (6) in fork bracket (2) and install fork shaft (4) through fork bracket (2) and fork (6). 19. Install two pins (7) and new rivet (8) in fork (6). 20. Install control lever (9) on fork shaft (4) with new pin (1). 21. Install adapters (12) and (11) and breather (10) on worm gear housing cap (23). 22. Install two new gaskets (22) and worm gear housing cap (23) on worm gear housing (20) with five new lockwashers (24) and screws (25). NOTE Ensure fork properly engages with clutch. 23. Install washer (19) and fork bracket (2) on worm gear housing cap (23) with new lockwasher (17) and screw (16). 24. Install two screws (18) and new lockwashers (17) on fork bracket (2) and worm gear housing cap (23). 25. Install washer (13) and eyebolt (21) on control lever (9) with nut (14) and new cotter pin (15). 16-50