TM9-2320-361-34 16-4. REAR WINCH REPAIR (M764) (Contd) 11. Install two oil caps (48) on bracket (8) and bracket (49). 12. Install four nuts (36) on studs (37) and (45) and install studs (36) and (45) on bracket (62). 13. Install washer (35) on stud (45) with nut (34). 14. Install bracket (38) on studs (45) and (37) with two nuts (40). 15. Install bracket (38) on two rods (18) with two nuts (41) and screws (42). 16. Position screw (39) through bracket (38) and install new lockwasher (43) and nut (44) on screw (39). 17. Install bracket (38) on bracket (8) and tighten screw (39). 18. Install washer (47), sprocket (61), new woodruff key (46), and sprocket (51) on bracket (49) with setscrew (50). 19. Install bracket (49) on two rods (18) with two screws (52), new lockwashers (59), and nuts (60). 20. Install support (57) on two rods (18) with two setscrews (55) and nuts (56). 21. Position screw (58) through support (57) and install new lockwasher (54) and nut (53) on screw (58). 22. Install support (57) on bracket (49) and tighten screw (58). 16-41