TM 9-2320-361-34 16-4. REAR WINCH REPAIR (M764) (Contd) 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Remove two nuts (32), lockwashers (33), and plate (51) from two carriage horns (34). Discard lockwashers (33). Remove four screws (42), lockwashers (43), washers (44), spacers (46), and guard (45) from cage (50). Discard lockwashers (43). Remove setscrew (62), pin (57), and roller (56) from cage (50). Remove cotter pin (61), washer (60), pin (58), and roller (59) from cage (50). Discard cotter pin (61). Remove two cotter pins (52), shafts (53), and rollers (55) from cage (50). Discard cotter pins (61). Remove four bearing sleeves (54) from two rollers (55). Remove two nuts (38), lockwashers (37), screws (39), and bracket (13) from two rods (30). Discard lockwashers (37). Remove setscrew (40), collar (41), sprocket (35), and washer (36) from bracket (13). Remove four screws (48), lockwashers (49), and two wear guides (47) from cage (50). Discard lockwasher (49). Remove two rods (30) from cage (50). 16-37